Projects

 
Components
 
High Voltage Power Supply
 
 

Brewing HV Amplifiers and Power Supplies with these components

The LC choke-input filter is used primarily in power supplies where voltage regulation is importantand where the output current is relatively high and subject to varying load conditions.
This filter is used in high power applications such as those found in radars and communication transmitters


Read more:

http://www.qsl.net/i0jx/supply.html

     
 

These capacitors are primarily used as filters in the output of high voltage DC power supplies. Construction is paper/oil/polypropylene with an environmentally compatible impregnant. Drawn cases are made of plated steeland the w elded cases are mild steel with an epoxy finish.

     
 

High Voltage Capacitor up to 12 kV With Low Inductance High Peak Current Capability and 8uF.

Size matters: fire lighter as reference

     
 

First of all, the HV experimenter who wants to work in the range of tens or hundreds of kilovolts is confronted with the problem that suitable parts are not readily available in electronic stores. In general, they are manufactured by specialized companies, and they are very expensive, sometimes unaffordable, when purchased new. With some luck, used parts or NOS (new old stock) parts can be acquired through junk yards, recycling facilities, surplus stores, or Ebay

     
 

MODULAR "HI-BEL" HV RECTIFIER ASSY
2.5 to 20kV - 0.6 to 10A
STD to 35nS
Glass Passivated "Hi-Bel" Rectifier Assy
2.5 to 20kV - 0.6 to 3A

Datasheets:
HDB7.5
Products overview HVCA

 

     
 

High Voltage 3p transformer
Weiht with out oil: 180kg (324lbs)

     
 

Philips oil filled, T189036
3x220/3x380VAC input
Sec. 5100 V / 1.9A (rated very conservative)

     
         
Back to TOP